TOP-40

The heat sensor is a thermistor, which reacts to the rise of temperature occurring during the first stage of a fire. At the time of the simultaneous detection of both the increase in temperature and flame detector transmits an alarm signal to the fire alarm control panel. The use of two sensors eliminates the possibility of false alarms and allows the use of detectors in areas where due to the amount of dust or dirt that was not previously possible.

• Type: Conventional, multisensor, point
• Category: To work in normal conditions
• Type: Temperature and flame
• Operational voltage: 9 VDC - 28 VDC
• Quiescent current consumption: < 90 µA
• Current consumption in alarm mode: 20mA
• Detector class: A1R acc. to PN-EN 54-5 and 2 PN-EN 54-10
• Detected test fires: TF1 to TF5 and TF8
• Addressing: Conventional detector without addresses
• Operating temperature range: From -20°C to 55°C
• Relative humidity: to 95% at 40°C
• Dimensions of detector with base: Ø115 x 71mm
• Weight: 0.20kg
• Enclosure colour: White
• Other parameters: Viewing range - max 17m (2 sensitivity class), IR detector viewing range - 60°