DS-2CE10DF3T-FS 2.8mm
Click Image for Gallery
High quality imaging with 2 MP, 1920 x 1080 resolution
24/7 color imaging with F1.0 aperture
Clear imaging against strong back light due to 130 dB true WDR technology
3D DNR technology delivers clean and sharp images
2.8 mm, 3.6 mm fixed focal lens
Up to 20 m white light distance for bright night imaging
High quality audio with audio over coaxial cable, built-in mic
One port for four switchable signals (TVI/AHD/CVI/CVBS)
Water and dust resistant (IP67)
Camera
- Image Sensor: 2 MP CMOS
- Max. Resolution: 1920 (H) x 1080 (V)
- Min. Illumination: 0.0005 Lux @ (F1.0, AGC ON), 0 Lux with white light
- Shutter Time: PAL: 1/25 s to 1/50,000 s;NTSC: 1/30 s to 1/50,000 s
- Day & Night: 24/7 Color Imaging
- Angle Adjustment: Pan: 0° to 360°, Tilt: 0° to 90°, Rotation: 0° to 360°
- Signal System: PAL/NTSC
- Slow Shutter: Max. 16 times
- Light Alarm: Solid Light Alarm (White Light)
Lens
- Lens Type: 2.8mm fixed focal lens
- Focal Length & FOV: 2.8mm, horizontal FOV: 98°, vertical FOV: 52°, diagonal FOV: 116°
- Lens Mount: M12
Illuminator
- Supplement Light Type: White Light
- Supplement Light Range: Up to 20 m
- Smart Supplement Light: Yes
Image
- Image Parameters Switch: STD/HIGH-SAT/HIGHLIGHT
- Image Settings: Brightness, Contrast, Mirror, Defective Pixel Correction, Sharpness, Anti-Banding
- Frame Rate: TVI: 1080p @ 25 fps/30 fps, CVI: 1080p @ 25 fps/30 fps, AHD: 1080p @ 25 fps/30 fps, CVBS: PAL/NTSC
- Day/Night Mode: Color
- Wide Dynamic Range (WDR): >130 dB
- Image Enhancement: WDR, BLC, HLC, Global, HLS
- Privacy Mask: 4 programmable privacy masks
- Noise Reduction: 3D DNR/2D DNR
- White Balance: Auto/Manual
- White Light: Auto/Off
- AGC: Yes
Interface
- Video Output: Switchable TVI/AHD/CVI/CVBS
- Built-In Microphone: Yes
Event
- Motion Detection: 4 programmable motion areas
General
- Material: Metal
- Dimension: 161.1 mm x 70 mm x 70 mm / Approx. 388gr
- Operating Condition: -40°C to 60°C, Humidity: 90% or less (non-condensing)
- Communication: HIKVISION-C
- Language: English
- Power Supply: 12 VDC ± 25% (*You are recommended to use one power adapter to supply the power for one camera)
- Consumption: Max. 4.2 W
Approval
- Protection IP67